Setup Security WIFI
Touch 6 System > 3 Setup > 6 WIFI > 5 Security > Touch the down arrow on Security and select WEP or WPA1-TKIP (depends on your router configuration), Touch KEY and enter your network code, then Touch SSID and enter your network name, PRESS ENTER and your terminal should reboot. It will take about 3 to 10 mins for the terminal to detect your WIFI.
To check WIFI status
Touch 6 System > 3 Setup > 6 WIFI > 1 View Status > If you see the IP address, SN Mask, Gateway, and DNS your are ready and then press CLEAR until you are at the main screen.
MAIN SCREEN
1 Credit 2 Debit 3 EBT4 GIFT 5 Check 6 System
Any further issues please contact our 24/7 Tech Support at (800)228-0210 and have your MID (merchant Identification available)
Note: To change a letter between lower and upper case, Press ENTER and ALPHA simultaneously.
passcode: 766130
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article