How do I reprogram FD Terminal through IP?

How do I reprogram my FD terminal?

1. Press and hold ENTER and 0 at same time


2. Enter Password 990712


3. Touch or Press 5 SETUP


4. Enter Password 990712


5. Touch or Press 6 ERASE


6. 
   Then RUN (This will clear memory/format and reboot) 


7. Touch or Press 1 PORT, 


8. Touch or Press IP 


9. Verify IP: vcprod.firstdata.com and PORT: 443


10. ENTER 


11. SAVE 


12. Touch or Press 2 FILE 


13. Enter TID Provided


14. Touch APN and enter Application 


15. ENTER 


16. Touch or Press RUN 

• This should start the Download. You should see M---------- 


• Then M*--------- (Shows that download has begun) 


• M********** (Shows that download is complete)


• MA Downloading, MDownload done. Update done!


• Press CLEAR 2X should prompt you to SSL screen again.


• Unplug power and plug back in.


• Run Test Transactions and make sure to settle or close.

NOTE: To make a letter press the ALPHA Key and then the number. 
Example: To get F, press ALPHA Key 3 times then the number 3. 
To get D, press the ALPHA Key 1 time then the number 3. 
To get the R, press the ALPHA Key 3 times then the number 7.